Feuling, HP+ Series oil pump & cam plate kit. Water Cooled

Artikelnummer: 707422
HAN: 7198
Kategorie: Neue Artikel
Hersteller: FEULING

17-25 M8. Center/Water cooled models (excl. 23-25 VVT models) | Artikelzustand: NEU

994,95 €

inkl. 19% USt. ,

Auswahl Steuerzone / Lieferland

Bald wieder verfügbar

Beschreibung
Benachrichtigen, wenn verfügbar

FEULING CENTER/WATER COOLED HP+ OIL PUMP & CAMPLATE KITS increase oil pressure; oil volume; engine oil flow and return oil scavenging Quieter and smoother engine operation Increase oil pressure; scavenge volume and engine oil flow 30% more pressure gear volume over stock 53% more scavenge gear volume over stock 42% more scavenge volume with port sizing; matched passages and holes to the engine case 46% more oil volume to the crankshaft and connecting rod bearing 15-25 degree cooler engine temperatures 15-30 degree cooler oil temperatures 10-30 more PSI of oil pressure Reduces wet sumping; blow by and oily air cleaners Magnets in oil pump to help protect gears and pressure relief valve Test results show 2 HP gain and 2 ft/lbs of TQ gain to the rear wheel on Milwaukee Eight NOTE: FEULING test results show a 50% reduction of engine sump oil level.Both HP+ and RACE SERIES kits include FEULING''S HIGH FLOW billet camplate made from 7075 aluminum which is 50% harder and stronger than the factory or Feuling OE+ camplates. FEULING increases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including matching the oil port holes throughout the camplate to the port holes in the engine case which increases engine oil flow to the lifters; piston cooling jets; crankshaft and rod bearings.The FEULING oil pumps are bench tested; the relief valve is seated and sealed to a minimum of 30 psi with full pop off at 55-60 psi. The incr

Kontaktdaten

Vorname

Nachname

E-Mail