Feuling, Race Serie oiling system. Gear or chain drive

Artikelnummer: 707407
Kategorie: Neue Artikel
Hersteller: FEULING

17-25 M8 with oil cooled engine | Artikelzustand: NEU

1.525,00 €

inkl. 19% USt. ,

Auswahl Steuerzone / Lieferland

Bald wieder verfügbar

Beschreibung
Benachrichtigen, wenn verfügbar

FEULING OIL COOLED oiling system kits combine all the needed components to finish your M8 engine''s oiling system under 1 Part #; available in HP+ or RACE SERIES kits. FEULING oiling system kits increase oil pressure; oil volume; engine oil flow and return oil scavenging Quieter and smoother engine operation 27% more pressure and scavenge gear volume over stock 42% more scavenge volume through port sizing; matched passages and holes to the engine case 46% more oil volume to the crankshaft and connecting rod bearing 15-25 degree cooler engine temperatures 15-30 degree cooler oil temperatures 10-30 more PSI of oil pressure Reduces wet sumping; blow by and oily air cleaners Test results show 2 HP gain and 2 ft/lbs of TQ gain to the rear wheel on Milwaukee Eight NOTE: FEULING test results show as much as 50% reduction of engine sump oil level.RACE SERIES kits include FEULING''S HIGH FLOW billet camplate made from 7075 aluminum which is 50% harder and stronger than the factory camplates. FEULING increases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including matching the oil port holes throughout the camplate to the port holes in the engine case which increases engine oil flow to the lifters; piston cooling jets; crankshaft and rod bearings.The FEULING oil pumps are bench tested; the relief valve is seated and sealed to a minimum of 30 psi with full pop off at 55-60 psi. The increased oil volume from the larger gears a

Kontaktdaten

Vorname

Nachname

E-Mail