S&S, Easy Start chain drive 551 camshaft set (CD)

S&S, Easy Start chain drive 551 camshaft set (CD)

Artikelnummer: 531706
Kategorie: Nockenwellen & Nockenwellensteuerung
Hersteller: S&S

07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU) | Artikelzustand: NEU

607,95 €

inkl. 19% USt. ,

Auswahl Steuerzone / Lieferland

Sofort verfügbar
Lieferzeit: 2 - 5 Werktage (DE - Ausland abweichend)

KIT

Bei diesem Artikel ist die Stückzahl teilbar (z. B. 0,5).

Beschreibung

.550" valve lift. CD = Chain Drive camshafts; complete kit with gasket and bearings. Torque for stock 96" Touring bikes. Strongest cam from idle to 4000 RPM for 96" to 106". Not recommended for 10:1 or higher CR. Easy Start Cams make starting easier by reducing the build-up of cranking pressure in the cylinders during starting. This is done by lifting the exhaust valve slightly of its seat; with a spring loaded compression release lobe inside the camshaft. After starting the compression release lobe is retracted by centrifugal force. The only difference is during starting since you will now be able to electric start your Big Inch engine effortless; without the use of big batteries and/or starter motors. A stock starter and battery is enough. When the engine is running the camshafts function as regular cams; without any loss in power; torque or anything else. Note: Only 551; 570; 583; 585; HP103 and MR103 series cams are bolt-in; all others may / will require clearancing and require